socket sizes

[Deviant400]

im off down me mates workshop to torque up the essentials tomoz so i need to take a pile of sockets
but cant remember the front axle bolt size
rear hub 46mm
rear wheel 36mm
top yoke 41mm
front axle bolt ???

[CMSMJ1]

I have 22mm and 24mm axle bolts..so take both!

[Deviant400]

cheers , will do

[scotjell]

Don't forget the socket to torque up the clamp bolts too.

[Deviant400]

yeah ill have all them smaller sizes at me mates workshop, he does tinting and wrapping so only really has basic sockets and tools needed for what he does , all the big stuff ill take with me, my plan is to go over everything and just check all is torqued up as per the manual , MOT on the horizon

[Deviant400]

17mm hub pinch bolt too i belive ?

[porndoguk]

I have 22mm and 24mm axle bolts..so take both!

was gonna say the same, some have 22, some have 24 for some odd reason i have neither i have a special hollow one for my fork crash bobbins :D

[Deviant400]

is that a whole front axle you got then ricky that allows the bobbins or do they bolt through the standard axle , and i think mine is a 24mm come to think of it

[porndoguk]

is that a whole front axle you got then ricky that allows the bobbins or do they bolt through the standard axle , and i think mine is a 24mm come to think of it

no its just the nut you replace so a 6mm or 8mm rod slides through and the mushrooms go either end,

www.coyotemoto.com

ive quoted them about 3 times this week, i should get commision :D

[scotjell]

I was wondering as seen you quote them on most of your posts.