Re-fitting NC30 carbs.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Phil_Norwich
- Settled in member
- Posts: 74
- Joined: Mon Jul 27, 2009 9:21 pm
Re: Re-fitting NC30 carbs.
I'm in Horsford, think I may have to take you up on that mate! I'll make the tea, milk and sugar?spud wrote:
alright chap , where abouts in norwich are you as i would be qute happy to pop round and give you a hand to get ur carbs on , once shown/how to put them on its realy qute easy with or with out rvf carb rubbers ,
sam
-
spud
- Settled in member
- Posts: 125
- Joined: Tue Apr 12, 2011 11:21 pm
- Bike owned: vfr nc30 1990 , yamaha rs 100
- Location: norwich , norfolk
Re: Re-fitting NC30 carbs.
Phil_Norwich wrote:I'm in Horsford, think I may have to take you up on that mate! I'll make the tea, milk and sugar?spud wrote:
alright chap , where abouts in norwich are you as i would be qute happy to pop round and give you a hand to get ur carbs on , once shown/how to put them on its realy qute easy with or with out rvf carb rubbers ,
sam
thats all good chap , milk and two sugars please
, pm me your post code and where sort time/day out , sam
-
Phil_Norwich
- Settled in member
- Posts: 74
- Joined: Mon Jul 27, 2009 9:21 pm
Re: Re-fitting NC30 carbs.
Carbs are re-fitted!! Big thanks to Sam for his help
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: Re-fitting NC30 carbs.
Well done Sam, always nice to hear members helping out other members.
-
spud
- Settled in member
- Posts: 125
- Joined: Tue Apr 12, 2011 11:21 pm
- Bike owned: vfr nc30 1990 , yamaha rs 100
- Location: norwich , norfolk
Re: Re-fitting NC30 carbs.
ibby4585 wrote:Well done Sam, always nice to hear members helping out other members.
thanks
and im always happy to help people out as im a bit of a beliver in what goes around comes around , or some thing like that
sam
-
rightnut
Re: Re-fitting NC30 carbs.
Just use a little vasiline or grease on the lips of the rubbers! The carbs will just slip in one time, then apply some pressure on them and tighten the clamps. You might want some1 to press down firmly on the carbs as u tighten the clamps. That is wat I found works best!