what size allen for forks

hannakournikova · Post by **hannakournikova** » Wed Apr 04, 2012 2:22 pm

what size allen key is required to remove the damper rod on the NC30 forks?

Post by **porndoguk** » Wed Apr 04, 2012 5:47 pm

hannakournikova wrote:what size allen key is required to remove the damper rod on the NC30 forks?

A long 6 off the top of my head

Post by **thunderace** » Wed Apr 04, 2012 7:06 pm

6mm?

You sure it's not 8mm?

Post by **porndoguk** » Wed Apr 04, 2012 7:15 pm

thunderace wrote:6mm? You sure it's not 8mm?

Im not sure its been that long since i had a fettle with my nc, but i recall using an od allen key i have in my cycle tool kit thats a really long 6mm, it could be an 8mm so disregard my input chris my brains no engaged today, day 4 of my first ever migraine!

Post by **thunderace** » Wed Apr 04, 2012 7:28 pm

You might be right bud, just most of the forks I've ever worked with have an 8mm hex bolt holding the damper rod in.

Post by **oldgreyandslow** » Thu Apr 05, 2012 4:29 pm

6mm I bought one last week

what size allen for forks

what size allen for forks

Re: what size allen for forks

Re: what size allen for forks

Re: what size allen for forks

Re: what size allen for forks

Re: what size allen for forks