How to fasten lower fairing panels

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
gullarm
Settled in member
Posts: 187
Joined: Tue Apr 26, 2011 1:12 pm
How to fasten lower fairing panels

Post by gullarm »

Right my bike is all back together now, the only problem I seem to have is the lower panels where they meet under the exhaust at the front.

I cant seem to get them to stay together, any bolt I fit seems to push the lowers apart and then falls out.

The rear section was very easy as the hole is in the middle of the two fairing bits so cant be pushed apart.

I had a look on the fiche to try and shed some light on the problem, but dont have the parts required.

Any suggestions?
Top
User avatar
petrolhead19
Site Supporter
Site Supporter
Posts: 454
Joined: Sun Oct 04, 2009 4:48 pm
Bike owned: 2 x nc23's 1 x nc29
Location: preston
Re: How to fasten lower fairing panels

Post by petrolhead19 »

do you have the v-piece? this connects the 2 lower fairings together at the front
xivlia wrote:because i can smell and see petrol squirting out from the exhaust. like little droplets
porndoguk wrote:That will be condensation, if you think its petrol get a lighter bellow the exhaust and see what happens?
Top
User avatar
thunderace
Site Supporter
Site Supporter
Posts: 1584
Joined: Fri Sep 10, 2010 9:03 pm
Bike owned: R6, YZF600R
Location: Blackburn, Lancs.
Re: How to fasten lower fairing panels

Post by thunderace »

You need one of these
Image

And some of these
Image


:mrgreen:
Conventional wisdom says to know your limits. To know your limits you need to find them first. Finding your limits generally involves getting in over your head and hoping you live long enough to benefit from the experience. That's the fun part.
Top
Post Reply

Return to “Honda - Workshop”