GSXR Flywheel Removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
RoninZX-10R
- Settled in member
- Posts: 216
- Joined: Tue Jul 07, 2009 1:50 am
- Bike owned: NC35 racebike, ZX10R roadbike
- Location: Melbourne, Australia
GSXR Flywheel Removal
Does anybody know how to remove the GSXR flywheel from an NC30?
It's easy enough to remove the standard NC30 flywheel, remove the 14mm bolt then insert an M20 bolt to force the flywheel off the crank. However, with the GSXR flywheel there's no internal thread to use a bolt to force it off the crank.
Any ideas???
It's easy enough to remove the standard NC30 flywheel, remove the 14mm bolt then insert an M20 bolt to force the flywheel off the crank. However, with the GSXR flywheel there's no internal thread to use a bolt to force it off the crank.
Any ideas???
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: GSXR Flywheel Removal
Its got a male thread on the central section so you need a female puller to fit this.
-
RoninZX-10R
- Settled in member
- Posts: 216
- Joined: Tue Jul 07, 2009 1:50 am
- Bike owned: NC35 racebike, ZX10R roadbike
- Location: Melbourne, Australia
Re: GSXR Flywheel Removal
Cheers, thanks a lot for your help 