hub diameter
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Deviant400
- Site Supporter
- Posts: 769
- Joined: Sat Sep 05, 2009 12:50 pm
- Bike owned: NC30, Kona Cowan
- Location: Trowbridge
hub diameter
does anyone know the exact diameter of the hole in the hub for the paddock stand (NC30) i cant find me verniers to check it myself
Deviants AM/PM buildxivlia wrote:no i am not dead. ive just been trying a few things....
viewtopic.php?f=62&t=27307
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: hub diameter
32mm but I think paddock stand Spindles should be 30mm
-
mick.mh2racing
- Site Supporter
- Posts: 364
- Joined: Wed Apr 30, 2008 6:23 pm
- Bike owned: NC30, then another and another
- Location: Pontefract
Re: hub diameter
Mine was 31.5mm. I made my own stand and got a piece of round bar machined down to that diameter and I always thought it was a strange size.
How hard can it be?
-
Deviant400
- Site Supporter
- Posts: 769
- Joined: Sat Sep 05, 2009 12:50 pm
- Bike owned: NC30, Kona Cowan
- Location: Trowbridge
Re: hub diameter
cheers guys , i finally managed to get a response from champion stands and there sending me a new bush for my stand so hopefully its the correct one if not ill have to make one up , cheers
Deviants AM/PM buildxivlia wrote:no i am not dead. ive just been trying a few things....
viewtopic.php?f=62&t=27307