Dyno Disappointment.....

[CMSMJ1]

It has been noted on here that Quill have been difficult in the past..

I'd steer well clear of them

[Variablevalves suck]

Do not know if this has been posted before but some info on different makes of jet
Width(thousands)------Kehein # -- DynoJets # -- Mikuni #
0,0350---- 92,5--------- 92----------- 86,3
0,0360---- 95----------- 94----------- 88,1
0,0370---- 97,5--------- 96----------- 90,0
0,0380---- 100---------- 98----------- 91,9
0,0390---- 102,5------- 100---------- 93,8
0,0400---- 105--------- 102---------- 95,6
0,0410---- 107,5------- 104---------- 97,5
0,0420---- 110--------- 106---------- 99,4
0,0430---- 112,5------- 108--------- 101,3
0,0440---- 115--------- 110--------- 103,1
0,0450---- 117,5------- 112--------- 105,0
0,0460---- 120--------- 114--------- 106,9
0,0470---- 122,5------- 116--------- 108,8
0,0480---- 125--------- 118--------- 110,6
0,0490---- 127,5------- 120--------- 112,5
0,0500---- 130--------- 122--------- 114,4
0,0510---- 132,5------- 124--------- 116,3
0,0520---- 135--------- 126--------- 118,1
0,0530---- 137,5------- 128--------- 120,0
0,0540---- 140--------- 130--------- 121,9
0,0550---- 142,5------- 132--------- 123,8
0,0560---- 145--------- 134--------- 125,6
0,0570---- 147,5------- 136--------- 127,5
0,0580---- 150--------- 138--------- 129,4
0,0590---- 152,5------- 140--------- 131,3
0,0600---- 155--------- 142--------- 133,1
0,0610---- 157,5------- 144--------- 135,0
0,0620---- 160--------- 146--------- 136,9
0,0630---- 162,5------- 148--------- 138,8
0,0640---- 165--------- 150--------- 140,6
0,0650---- 167,5------- 152--------- 142,5
0,0660---- 170--------- 154--------- 144,4
0,0670---- 172,5------- 156--------- 146,3
0,0680---- 175--------- 158--------- 148,1
0,0690---- 177,5------- 160--------- 150,0
0,0700---- 180--------- 162--------- 151,9
0,0710---- 182,5------- 164--------- 153,8
0,0720---- 185--------- 166--------- 155,6
0,0730---- 187,5------- 168--------- 157,5
0,0740---- 190--------- 170--------- 159,4
0,0750---- 192,5------- 172--------- 161,3
0,0760---- 195--------- 174--------- 163,1
0,0770---- 197,5------- 176--------- 165,0
0,0780---- 200--------- 178--------- 166,9
0,0790---- 202,5------- 180--------- 168,8
0,0800---- 205--------- 182--------- 170,6
0,0810---- 207,5------- 184--------- 172,5
0,0820---- 210--------- 186--------- 174,4
0,0830---- 212,5------- 188--------- 176,3
0,0840---- 215--------- 190--------- 178,1
0,0850---- 217,5------- 192--------- 180,0
0,0860---- 220--------- 194--------- 181,9
0,0870---- 222,5------- 196--------- 183,7
0,0880---- 225--------- 198--------- 185,6
0,0890---- 227,5------- 200--------- 187,5

[phil x]

Cheers for the replies - yep I'm not impressed & certainly won't be going back (neither will anyone I know )

Phil

[porndoguk]

forgive me for stateing the obvious,

But why havent you asked to be compensated, at very least id expect my damaged to be repaired or refunded and the dyno run for free regardless,

anyone trying to wheelie my bike without asking first would get a chain wrapped round there throat!

total Fail,

Quill have a shit name anyway so it doubt you can do anymore to rubbish there failing name!

maybe a post on BCF might see more people detered.

[phil x]

Spread the word dude!

Don't use Quill exhausts in Golborne!

Yeah, I was & still am pi@@ed off about it moreso about the uncaring attitude of the bloke that did it..... to be fair the screen had a little crack from when I overtightened it a while back , it broke there & no other damage was done.
Sure I got the free dyno which will kind of pay for the screen. That's not the point though.

Not impressed with Quill exhausts Golborne Lancashire. Don't use 'em folks'

Phil

[Drunkn Munky]

Agree with ricky, why accept a free dyno run from them when their shit? Go back and get compensated for the damage with the list price from honda in your hand.

[CRM]

Phil, and advise him the boys from 400greybike (the ones he says dont know what they are talking about) suggest he replaces it with a superior tyga product if he doesn't want to buy you a genuine item, maybe suggest going for the double bubble type, or twin stack screen but not one on a funny angle

[Cammo]

Yeah that's not on at all!

if he doesn't want to buy you a genuine item, maybe suggest going for the double bubble type, or twin stack screen but not one on a funny angle

[phil x]

It does sound like there has been a bit of friction between 400gb & Quill in the past thats still ongoing!

The dyno guy is a knob (can't speak for ghe others) I learnt the hard way.....

Phil

[spud]

a friend of mine around 2 years ago took his zx10 track bike to a place called seastar ( in norfolk) to have it dynoed cool he thought , untill the bloke rolled his bike off the machine and i dont know how the bloke manged to do it but he droped the bike as he was taking it off the ramp to give the bike back to my friend , as you may imagine my friend was not to happy , long storey short it took six months and a solicitor to sort it out and my mate ended up with a check for £350 from seastar to repair the damage fairings , hence we call them shit star from now on ,

just throw the book at them works every time , or get ur solicitor to send them a letter about the damage etc , they soon sweat , or do it the old way you and a couple of mate pay him a visit one evening before closing time , ive know it to work when customer havent payed me in the past for work ive done in the past ( ie build them a extention and then they say we cant pay you , even tho they just brought a car and went on hoilday )

sam