bike wont start and backfires

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
beaunc30
Settled in member
Posts: 10
Joined: Sat Oct 15, 2011 10:40 pm
bike wont start and backfires

Post by beaunc30 »

hi could anybody give me any ideas as to what could be wrong with my bike it has sat in the shed for a couple of months but has always been started regulary, i started it today and it started fine switched it off then left it about 5-10 mins then started it again and didnt seem to run very well as if it was only firing on 3 cylinders then it would only run with the choke fully open but only just, checked all plugs are sparking and they seem to spark fine, checked all breathers and took the top of airbox off everything seems ok but now it wont start at all just backfires now and then i am completely confused to what it could be.
spud
Settled in member
Posts: 125
Joined: Tue Apr 12, 2011 11:21 pm
Bike owned: vfr nc30 1990 , yamaha rs 100
Location: norwich , norfolk
Re: bike wont start and backfires

Post by spud »

might seem a silly one but have you checked to see if its geting petrol , (ie) vacuum hose on the tap to the cylinder head as these can come off and brake down over time , and give the earth points on ur bike a check over in case you have painted any brackets and geting poor earth , but im sure wont be long till some one with alot more know will come and give you a hand :grin:

spud
beaunc30
Settled in member
Posts: 10
Joined: Sat Oct 15, 2011 10:40 pm
Re: bike wont start and backfires

Post by beaunc30 »

thanks for your help all pipes etc seem to be fine im pretty sure in thinking that if its backfiring its getting petrol think i might get myself some new plugs and give that a try
scotjell
Regular Member
Posts: 501
Joined: Mon Aug 18, 2008 7:33 pm
Bike owned: VFR400 NC30x2
Location: Bristol
Re: bike wont start and backfires

Post by scotjell »

Possible CDI problem, if replacing plugs check each one for a spark. Had similar problem tried all sorts and luckily I had a donor NC so borrowed the CDI and started first time. Graeme France on here does CDI's if you need one.
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7161
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: bike wont start and backfires

Post by CMSMJ1 »

Plugs...always is!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Morespeedvicar
Site Supporter
Site Supporter
Posts: 837
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: bike wont start and backfires

Post by Morespeedvicar »

CMSMJ1 wrote:Plugs...always is!
Damn he beat me to it!

Try taking the plugs out and putting the tip into a gas cooker flame or a blow torch, dry them out. Maybe give them a wire brush aswell.
Cheers
Ian
beaunc30
Settled in member
Posts: 10
Joined: Sat Oct 15, 2011 10:40 pm
Re: bike wont start and backfires

Post by beaunc30 »

changed the plugs for some nice new ones today and it started first time and runs like a dream :)
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7161
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: bike wont start and backfires

Post by CMSMJ1 »

W00t. Always the plugs man...
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Jashdown
Settled in member
Posts: 145
Joined: Sun Sep 18, 2011 9:59 am
Location: Wollongong, Australia
Re: bike wont start and backfires

Post by Jashdown »

Whyyyyy does it always have to be the plugs when they are so expensive! Places in Aus sell them for $30 a piece.
scotjell
Regular Member
Posts: 501
Joined: Mon Aug 18, 2008 7:33 pm
Bike owned: VFR400 NC30x2
Location: Bristol
Re: bike wont start and backfires

Post by scotjell »

There's a guy on flea bay sells them for around £7 each!

Post Reply