Valve stem seals

[reverse cylinder jim]

Has anyone sourced stem seals from anywhere else other than from Honda?
I had a quote from my local dealer and genuine ones come in at about £8 each which i thought was bloody expensive.
Thanks

[Dgeoff33]

Don't they come with a full gasket set?

[porndoguk]

Has anyone sourced stem seals from anywhere else other than from Honda?
I had a quote from my local dealer and genuine ones come in at about £8 each which i thought was bloody expensive.
Thanks

Wemoto jim

[reverse cylinder jim]

Thanks for the info fella's

[skinnydog0_0]

Rick O does them too James. I used a full set when i re-built my engine and they have been spot on. They were also much cheaper than any others i found.

[reverse cylinder jim]

Rick O does them too James. I used a full set when i re-built my engine and they have been spot on. They were also much cheaper than any others i found.

Thankyou, ive sent Rick an email.

[porndoguk]

Rick O does them too James. I used a full set when i re-built my engine and they have been spot on. They were also much cheaper than any others i found.

nice on jeff i didnt know he did them will come in handy when i get round to ordering some.

[Drunkn Munky]

@ jeff and jim, So roughly what has it cost you in gaskets, seals etc to rebuild your motors?

[skinnydog0_0]

@ jeff and jim, So roughly what has it cost you in gaskets, seals etc to rebuild your motors?

Off the top of my head it was about £100 for all the gaskets, valve stem seals and a new copper washer for sump and water pump. I used genuine Honda Head gaskets, crank a genny. I used an aftermarket one for the sump. I ordered a batch of exhaust gaskets from David silver about 20 i think to cut the cost of postage, but you will need to allow for those too. I used clear Hylomar for the cases, but blue may be easier to see on the silver of the 35 engine.
HTH.

[Drunkn Munky]

Cheers pal i expected double that