skidmarx panels?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Matchlessman
- Familiar Member
- Posts: 261
- Joined: Fri May 02, 2008 12:29 pm
- Location: Stroud, Glos
Re: skidmarx panels?
Dan,
If the lowers and mids are off then its probably a good time to repair them. - its got to be cheaper than skidmarx panels.
have you got enough each side to see what the missing bits are? How bad are they?
Either use plastex or some cableties and soldering iron. (i prefer soldering iron) basically you melt the cabletie to the existing bit of fairing and then shape it. it seems to work ok.
If the lowers and mids are off then its probably a good time to repair them. - its got to be cheaper than skidmarx panels.
have you got enough each side to see what the missing bits are? How bad are they?
Either use plastex or some cableties and soldering iron. (i prefer soldering iron) basically you melt the cabletie to the existing bit of fairing and then shape it. it seems to work ok.
-
DK-Tandy
- Familiar Member
- Posts: 482
- Joined: Thu Aug 19, 2010 1:52 am
- Bike owned: CBR400RR NC23
- Location: West Bromwich UK
- Contact:
Re: skidmarx panels?
theyre off, theyre scuffed and the and all holes where bolted to other fairings and fairing bracket are broken.. i would rather replace and have a new theme on the bike that used a tatty theme, because if i try and repair it, it'll need respraying anyway.