nc30 vfr400 handle bar removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
leerc
- Settled in member
- Posts: 129
- Joined: Wed Nov 09, 2011 12:15 pm
nc30 vfr400 handle bar removal
do the forks need to come off to get it off? the wind blow my bike over on saturday and snapped the bolt holding the bar end on
-
spud
- Settled in member
- Posts: 125
- Joined: Tue Apr 12, 2011 11:21 pm
- Bike owned: vfr nc30 1990 , yamaha rs 100
- Location: norwich , norfolk
Re: nc30 vfr400 handle bar removal
hi ,leerc wrote:do the forks need to come off to get it off? the wind blow my bike over on saturday and snapped the bolt holding the bar end on
you just need to undo the big centre nut on the top yoke , then undo the two pinch bolts . think there 6mm allen key bolts , take them out and then gently give the top yoke a tap with a rubber hammer and should pull off . think thats the easiest way round it
spud