NC30/35 Titanium - Wheel, Hub & Yoke Nuts

[Le_Blur]

Yeah, sorry. Can you cross me off for now? Christmas is just round the corner.

[Kayla850]

hub nut for me and +1 for the hub adjuster bolt if you can get them made, there m14 1.5 pitch i believe

Thanks Rick, I'll get the adjuster bolt made next time with the NC35 top yoke nuts. Can someone measure the hub adjuster bolt and give me a definite diameter, length and pitch please? Are they allen head or would you want them drilled flange hex?

[Drunkn Munky]

The hub adjuster bolts are the flange hex type, the ti one I use the have had a hole drilled right through the centre to save weight too

[Kayla850]

The hub adjuster bolts are the flange hex type, the ti one I use the have had a hole drilled right through the centre to save weight too

Cool. If someone can confirm the sizes I'll get a batch done.

[Le_Blur]

The thread is an M14 x 51mm, I'm unsure of the pitch I'm afraid, and I think the head is 17mm AF (from memory). I hope this helps.

[Kayla850]

The thread is an M14 x 51mm, I'm unsure of the pitch I'm afraid, and I think the head is 17mm AF (from memory). I hope this helps.

Yes it does, thanks, now if someone could hold any bolt (a normal M10 would do) with a 1.5mm pitch next to one we could see what pitch it is

[Kayla850]

Right, the first order of 25 hub nuts, 25 NC30 top yoke nuts and 25 wheel nuts is paid for and they will be ready in 25 working days, so, just in time for Christmas then...

Anyway, sorry for the delay in sorting it all out but it's underway

I'll probably be sorting the other stuff out (NC35 top yoke nut and the hub adjuster bolts) after Christmas, just because it's a pain in the arse trying to get anything done at the this time of year

[dgunthor]

The thread is an M14 x 51mm, I'm unsure of the pitch I'm afraid, and I think the head is 17mm AF (from memory). I hope this helps.

Yes it does, thanks, now if someone could hold any bolt (a normal M10 would do) with a 1.5mm pitch next to one we could see what pitch it is

Head is definately 17mm

[micpec]

Right, the first order of 25 hub nuts, 25 NC30 top yoke nuts and 25 wheel nuts is paid for and they will be ready in 25 working days, so, just in time for Christmas then...

Anyway, sorry for the delay in sorting it all out but it's underway

I'll probably be sorting the other stuff out (NC35 top yoke nut and the hub adjuster bolts) after Christmas, just because it's a pain in the arse trying to get anything done at the this time of year

Nice! I will stay tuned as soon as this 1st batch of Ti nuts are ready and available Definately interested in these. Also fancy some of the "after X-mas' batch with Ti Nc35 top yoke nuts and hub adjuster bolts

[hunter]

Kala is this any help,The only thing i didn't measure was the dia.