NC30/35 Titanium - Wheel, Hub & Yoke Nuts

[porndoguk]

All are grade 5 Titanium, plain finish (ie no anodising or polishing, just a plain machined finish)



NC30 ONLY - 41mm Yoke Nut - £19 + £2.99 P&P



36mm Wheel Nut - £25 + £2.99 P&P



46mm Hub Nut (Reusable) - £29 + £2.99

All 3 bought together as a discounted set = £60 + £2.99

these will be available in 5 weeks time, i hope there is as much interest as before but this time this is a GO'er



EDIT:

the hub nut with the holes drilled and split/R pin may cause you problems on a paddock stand, i think you can stake the nut tab in, but then it isnt reusuable, so ideally for Abba stand users or if you happy to remove the split/R pin each.

the holes i think will be 3mm Dia and will require drilling the hub and posibly the wheel spindle,

International shipping is £3.99, or £7.99 for signed-for.

I keep proof of posting and I won't accept any responsibilty for stuff going missing in the post if it's not sent signed-for.

[porndoguk]

Porndoguk - 1x Hub Nut

[porndoguk]

JUST TO ADD

the hub nut with the holes drilled and split/R pin may cause you problems on a paddock stand, i think you can stake the nut tab in, but then it isnt reusuable, so ideally for Abba stand users or if you happy to remove the split/R pin each.

the holes i think will be 3mm Dia and will require drilling the hub and posibly the wheel spindle,

[porndoguk]

International shipping is £3.99, or £7.99 for signed-for.

I keep proof of posting and I won't accept any responsibilty for stuff going missing in the post if it's not sent signed-for.

[Delboy]

Porndog x1 hub nut
Vfrderek x1 hu bnut

[lizard821000]

if you want somin done, ask ricky, simple.

Porndog x1 hub nut
Vfrderek x1 hub nut
lizard821000 x1 hub nut

[lukemillar]

Would you happen to know the weight savings for each part over OE?

Cheers
Luke

[porndoguk]

they havent been made yet.

[marcus57]

Any chance of a 35 top nut?

[amaechizzle]

If there is I would be down for all three!