sprocket

Post by **hunter** » Tue Oct 11, 2011 3:05 pm

Where can i get a 520x47 tooth alloy rear sprocket for a NC30.
cheers.

Post by **CMSMJ1** » Tue Oct 11, 2011 3:45 pm

Doesn't matter as I doubt you can physically fit it - It is tight as hell with a 44 and I reckon 45/46 might be impossible. There will be no chain adjustment at all.

47 is wishful thinking...though would be impressed if anyone had done it?

Post by **Neosophist** » Tue Oct 11, 2011 4:28 pm

Would be interesting.

HRC Kit came with 37 - 43.

Why do you want to add 7 teeth over stock to the rear though!? Why not knock some off the front instead?

AFAM dot a 13T front sprocket which is like having a 46 rear.

Chain working load is going to be higher using a 13T front as opposed to a 46 rear but there isn't a lot you can do with fitting large rear sprockets.

Post by **hunter** » Tue Oct 11, 2011 9:32 pm

I need this for my 4-6 hybrid,i'm using the NC30 Swingarm,recommendid gearing is 14.45.I would rather use a 15 front to leave me a little more room so that leaves me with 46,or 47 rear,CMSMJ1 i can space it off the swingarm.

Post by **CMSMJ1** » Tue Oct 11, 2011 10:52 pm

well, if NSR250s and RC30/45s can be had in 47 you are right..

sprocket

sprocket

Re: sprocket

Re: sprocket

Re: sprocket

Re: sprocket