Routing the ignition to the kill switch??
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Routing the ignition to the kill switch??
Can anyone tell me how this is done?
My next job after Donington on Thursday is to strip the loom off the bike and take out all of the unused road gumpf (inicators, headlights, fan etc) and I want to rout the ignition through the kill switch but have no idea where to start.
Chris I'm looking at you..
My next job after Donington on Thursday is to strip the loom off the bike and take out all of the unused road gumpf (inicators, headlights, fan etc) and I want to rout the ignition through the kill switch but have no idea where to start.
Chris I'm looking at you..
-
chrisja2
- Site Supporter
- Posts: 642
- Joined: Wed Apr 30, 2008 5:44 pm
- Bike owned: nc29 trackbike
- Location: Nottingham
Re: Routing the ignition to the kill switch??
If its the same as i did for you last time, bring it round and we can have a look over a brew.
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: Routing the ignition to the kill switch??
The whole loom?
dont suppose you fancy helping me to wire in a dash do you?
I'll pay....
dont suppose you fancy helping me to wire in a dash do you?
I'll pay....
-
chrisja2
- Site Supporter
- Posts: 642
- Joined: Wed Apr 30, 2008 5:44 pm
- Bike owned: nc29 trackbike
- Location: Nottingham
Re: Routing the ignition to the kill switch??
For sure, what are mates for?
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: Routing the ignition to the kill switch??
Awesome mate!
-
doug
- Settled in member
- Posts: 14
- Joined: Fri Feb 12, 2010 4:20 pm
Re: Routing the ignition to the kill switch??
I'm wanting to do the same with my 29, I don't suppose you have a wiring diagram or photos of what to do?
Any info much appreciated.
Any info much appreciated.
-
doug
- Settled in member
- Posts: 14
- Joined: Fri Feb 12, 2010 4:20 pm
Re: Routing the ignition to the kill switch??
I think I figured it out.
I snipped the BLACK and the BLACK/WHITE wires that go to the kill switch.
I then joined the RED and the RED/BLACK from the ignition switch to the BLACK and the BLACK/WHITE that goes to the kill switch. 4 wires in 1.
Then joined the BLACK that goes to the fuse box and the BLACK/WHITE that goes to the HT lead together.
As it is a track bike I left the fan BLUE/ORANGE wire disconnected.
It seems to work a treat.
I snipped the BLACK and the BLACK/WHITE wires that go to the kill switch.
I then joined the RED and the RED/BLACK from the ignition switch to the BLACK and the BLACK/WHITE that goes to the kill switch. 4 wires in 1.
Then joined the BLACK that goes to the fuse box and the BLACK/WHITE that goes to the HT lead together.
As it is a track bike I left the fan BLUE/ORANGE wire disconnected.
It seems to work a treat.