hi ppl my nc30 is currently idling 2500 revz, it should be at around 1300 revz
can someone plz explain to me how i go about changing it back to 1300???????
and if my bike is idling high what are the damages????
besides fuel?
vfr nc30 ilde speed change
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
arsey30
- Senior Member
- Posts: 1218
- Joined: Tue Apr 29, 2008 9:13 pm
- Bike owned: ftr223 650 bros
- Location: Surrey
Re: vfr nc30 ilde speed change
The idle speed adjuster is bolted to the bottom of the frame above the generator cover on the left hand side.
There may be an air leak if it is running that fast, but turn the cable screw out, anti clockwise, to check.
No real damage but gear selection will be more difficult, and I don't like to run cold engines fast
There may be an air leak if it is running that fast, but turn the cable screw out, anti clockwise, to check.
No real damage but gear selection will be more difficult, and I don't like to run cold engines fast
-
Trinirides
- Site Supporter
- Posts: 198
- Joined: Thu Jul 15, 2010 6:52 pm
- Bike owned: NC30 is all you need to know
- Location: Sangatte detention centre
Re: vfr nc30 ilde speed change
Also make sure the choke isnt on a tiny bit.... Again left had side of the bike just above the idle adjuster...