FZR 400 OIL MOD
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
boxter99
- Settled in member
- Posts: 30
- Joined: Tue Aug 02, 2011 10:13 pm
- Bike owned: FZR's, R1's etc
FZR 400 OIL MOD
Hello,
lately I am rebuilding an FZR400 and wanted to do the oil mod on the bottom cases. Basically the FZR600 and the 400 seem to be shared similar cases but the oil ways on the 400 are somewhat restricted I visited BDK's website and read the comment there but was still a bit unclear. Here are two photos from Rob Bunyan which clear out the issue.
http://img717.imageshack.us/img717/6789/topviewe.jpg
http://img5.imageshack.us/img5/9329/oilgallery.jpg
Regards,
lately I am rebuilding an FZR400 and wanted to do the oil mod on the bottom cases. Basically the FZR600 and the 400 seem to be shared similar cases but the oil ways on the 400 are somewhat restricted I visited BDK's website and read the comment there but was still a bit unclear. Here are two photos from Rob Bunyan which clear out the issue.
http://img717.imageshack.us/img717/6789/topviewe.jpg
http://img5.imageshack.us/img5/9329/oilgallery.jpg
Regards,
-
bendy3
- Settled in member
- Posts: 173
- Joined: Thu Jul 10, 2008 5:11 pm
- Bike owned: FZR400RRSP FZR400 HYBRID RRSP
Re: FZR 400 OIL MOD
Hi, you have to drill them out to 6mm then helicoil the top of the hole back to an m6 thread so the oil jet can be replaced with a bit of locktight. If you dont replace the oil jet there will be a loss of oil pressure to the crank.