Stomp Grip

[iDemonix]

Sick of banging my knackers on the tank, anyone used stomp grip or similar? They don't do a specific shape for the NC30 so wondered if anyones had any look with the 'generic' shapes.

[gissmo50]

i use the stomp grip on my cbr600 and can say they work very well and i no longer slam the giggle berries into the tank on a regular basis.

[Moore]

Great question iDemonix ,, i also would like to know a shape/pattern of stomp grip to suit the nc30 tank. I have had a look on the stomp grip website, theres plenty to choose from ( but which should i choose) i want a to buy good fitment grip and dont want to cut 1 down to shape? anybody bought or know of 1 to go for..

Thanks, Moore

[lukemillar]

The is no specific fitment for the NC30, but the universal grips are pretty good with only minimal cutting. Only problem I found is that the glue tends to smear off the cut edge which sucks.

Techspecs do custom setups, so if you mail them the specs/drawings, you could get something that would fit perfectly. I was planning on doing this only I ran out of time before the season started. Was going to work out about twice a expensive as the universal Stomp grip though

[RoninZX-10R]

I use the universal Stomp Grips on my race bike and they fit great and definitely help avoid additional pain in the knackers region by clamping your legs hard against the tank when you're braking. I'd recommend them, haven't tried Techspecs though.

[richhemmings]

sorry to resurrect a zombie lads, but for anyone who stumbles across this in future, I (and a few others) have used the Motrax equivalent with success...


Take your time and create a template first, then peel+stick in little steps to get a neat finish.

Gettem' here:
http://www.motorcycleclothingshop.co.uk ... sheet.html