Wheels - Powcer coat or paint?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
oldgreyandslow
Site Supporter
Site Supporter
Posts: 421
Joined: Fri Jun 10, 2011 2:59 pm
Bike owned: 1990 NC30
Location: Farnborough
Wheels - Powcer coat or paint?

Post by oldgreyandslow »

My front wheel is very tatty, the rears not so bad but has a few chips.

I'm thinking of at least getting the front done for starters, the question is powder coat or paint? What looks the best and will last?

Cost is an issue too

Any recommendations appreciated
User avatar
Hadies
Site Supporter
Site Supporter
Posts: 606
Joined: Tue Mar 16, 2010 1:20 am
Bike owned: NSR125, NC30, Daytona 675
Location: Washington, Tyne and Wear
Re: Wheels - Powcer coat or paint?

Post by Hadies »

oldgreyandslow
Site Supporter
Site Supporter
Posts: 421
Joined: Fri Jun 10, 2011 2:59 pm
Bike owned: 1990 NC30
Location: Farnborough
Re: Wheels - Powcer coat or paint?

Post by oldgreyandslow »

Thanks for that I think its two pack paint then
lizard821000
Site Supporter
Site Supporter
Posts: 903
Joined: Thu Feb 03, 2011 5:33 pm
Bike owned: nsr ,cagiva mito , vfr 400 R3L
Location: portsmouth
Re: Wheels - Powcer coat or paint?

Post by lizard821000 »

funny enough i opted for pwdcoat in the end, wheel were just too much of a mess for paint.

Image


however, i did get my mito wheels done in 2 pack, the most noticable differance is that the 2 pack paint wheels apper thinner,so more slick, the pwdcoat looks awsome but noticable thicker layerd than the paint.

Image

they both cost around the same. 75 quid....for the pair ;)
oldgreyandslow
Site Supporter
Site Supporter
Posts: 421
Joined: Fri Jun 10, 2011 2:59 pm
Bike owned: 1990 NC30
Location: Farnborough
Re: Wheels - Powcer coat or paint?

Post by oldgreyandslow »

75 quid for the pair, sounds good, whereabouts from?
lizard821000
Site Supporter
Site Supporter
Posts: 903
Joined: Thu Feb 03, 2011 5:33 pm
Bike owned: nsr ,cagiva mito , vfr 400 R3L
Location: portsmouth
Re: Wheels - Powcer coat or paint?

Post by lizard821000 »

the paint was done by a friend of the old mans, for free lol but he said thats about the cost. the pwder was also done by a friend of the old mans girlfriend, lives in stubbington area , hampshire mate.he might have charged me a little less but i did ring around about 2-3 other places befor hand and got very similar quotes tbh. pwdcoating is cheap,paint should be cheaper. its all in the prep mate. i can try find out the guy if you like? what area you in?
User avatar
Hadies
Site Supporter
Site Supporter
Posts: 606
Joined: Tue Mar 16, 2010 1:20 am
Bike owned: NSR125, NC30, Daytona 675
Location: Washington, Tyne and Wear
Re: Wheels - Powcer coat or paint?

Post by Hadies »

http://i1115.photobucket.com/albums/k54 ... AG0232.jpg

Those are my wheels that I sprayed with 2 pack.
Generally, you get a nicer finish with 2 pack but powder coating tends to be a bit more durable.
lizard821000
Site Supporter
Site Supporter
Posts: 903
Joined: Thu Feb 03, 2011 5:33 pm
Bike owned: nsr ,cagiva mito , vfr 400 R3L
Location: portsmouth
Re: Wheels - Powcer coat or paint?

Post by lizard821000 »

lol, we are the white wheel crew :grin:
oldgreyandslow
Site Supporter
Site Supporter
Posts: 421
Joined: Fri Jun 10, 2011 2:59 pm
Bike owned: 1990 NC30
Location: Farnborough
Re: Wheels - Powcer coat or paint?

Post by oldgreyandslow »

lizard821000 wrote:the paint was done by a friend of the old mans, for free lol but he said thats about the cost. the pwder was also done by a friend of the old mans girlfriend, lives in stubbington area , hampshire mate.he might have charged me a little less but i did ring around about 2-3 other places befor hand and got very similar quotes tbh. pwdcoating is cheap,paint should be cheaper. its all in the prep mate. i can try find out the guy if you like? what area you in?
Farnborough, I do get down Portsmouth way quote frequently though so anywhere South is no problem. cheers
lizard821000
Site Supporter
Site Supporter
Posts: 903
Joined: Thu Feb 03, 2011 5:33 pm
Bike owned: nsr ,cagiva mito , vfr 400 R3L
Location: portsmouth
Re: Wheels - Powcer coat or paint?

Post by lizard821000 »

thats fine then mate, ill try sort somin out for you.

Post Reply