Linkage pivot arm.

Streetfighterz1000 · Post by **Streetfighterz1000** » Fri Aug 05, 2011 6:03 pm

Hello, me again!

Dismantled the rear shock today and on the linkage pivot arm youv'e got the 3 spacer's, ive taken out the bottom two+dust seals, however having trouble with the top one(smallest), is this supposed to be removed or is it a bush? Got a Haynes but still not clear. If it is not supposed to be removed is it supposed to rotate as this one wont budge.

Thanks.

Post by **Hadies** » Fri Aug 05, 2011 6:11 pm

The top one doesn't come out it's a bush. Check the parts manual to confirm

Post by **Delboy** » Fri Aug 05, 2011 6:35 pm

Yes it's a bush and does not rotate.... I have converted mine to a roller bearing (as per the NC35) and have a Honda bush still in packet if you want it...

Streetfighterz1000 · Post by **Streetfighterz1000** » Fri Aug 05, 2011 6:48 pm

Thanks again for the quick replys. No thanks vfrderek just wanted to know its purpose, cheers anyway though.

Post by **Delboy** » Fri Aug 05, 2011 6:57 pm

No probs......

Streetfighterz1000 · Post by **Streetfighterz1000** » Fri Aug 05, 2011 9:31 pm

Also, does anyone know where i can get hold of new dust seals for the linkage, i need 6 alltogether, i think!

Post by **Delboy** » Sat Aug 06, 2011 5:04 pm

You can either go to Honda or a any bearing supplier and ask for oil/dust seal size:
17x27x5

Or Honda part number 91262-MG7-005 £2.50 each from
http://www.davidsilverspares.co.uk/part ... 262MG7005/

Linkage pivot arm.

Linkage pivot arm.

Re: Linkage pivot arm.

Re: Linkage pivot arm.

Re: Linkage pivot arm.

Re: Linkage pivot arm.

Re: Linkage pivot arm.

Re: Linkage pivot arm.