Advice needed on HID kits on NC21

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Advice needed on HID kits on NC21

Post by Neosophist »

That philips extreme I posted a link too is a normal 55/60watt but its AWESOME light produced.

The gas is at a higher pressure and it has a nice quartz tint filter to make the light nice and good.

What car bulb of the year as well as which and autocar etc.

Cracking beam and nice bright light in the right place (the distance)

I really really recommend a set! :-)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
duncan
Settled in member
Posts: 177
Joined: Wed May 14, 2008 7:20 pm
Re: Advice needed on HID kits on NC21

Post by duncan »

Strictly speaking the tax disc should be on the left hand side within 12 inches of the headlamp

That is now not a bad looking NC21.Are you going to get the NC24 swingarm and rear wheelo to match the NC24 exhaust system?
Vfr400/tbird
Settled in member
Posts: 92
Joined: Sun Mar 27, 2011 7:19 pm
Bike owned: VFR400 NC21 Thunderbird 900
Location: West huntspill Somerset
Re: Advice needed on HID kits on NC21

Post by Vfr400/tbird »

I may do in the future, but for now I need to save cash in order to sort out the thunderbird as it needs fork seals and the rear shock fitted!

Plus I kinda like the twin arm unit!

Post Reply