NC30 Carb Tuning help
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PeteJ
- Site Supporter
- Posts: 85
- Joined: Tue May 17, 2011 7:55 pm
- Bike owned: Monster S2R - CBR600 - NC30
- Location: Essex
NC30 Carb Tuning help
Ok so bike has been on the road for approx 100 miles and it is going well, but definately feels like its ever under or overfuling - it seems to hold back and even stutter before it comes to life. I did strip the carbs clean all the jets out as some were blocked, I did check the sizes of the Jets.
The Bike is running an art can Slip on (track can i think)
So bike is getting painted in coming weeks and whilst fairing is all off and tank, im going to strip the carbs again and re jet i guess and then balance them. I know there is a guide on here somewhere but will it help with the correct bits i need to buy for the re jet, cand i guess re clean?
Thanks
Pete
The Bike is running an art can Slip on (track can i think)
So bike is getting painted in coming weeks and whilst fairing is all off and tank, im going to strip the carbs again and re jet i guess and then balance them. I know there is a guide on here somewhere but will it help with the correct bits i need to buy for the re jet, cand i guess re clean?
Thanks
Pete
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: NC30 Carb Tuning help
What jets are in there now?
-
PeteJ
- Site Supporter
- Posts: 85
- Joined: Tue May 17, 2011 7:55 pm
- Bike owned: Monster S2R - CBR600 - NC30
- Location: Essex
Re: NC30 Carb Tuning help
Sorry was supposed to read 'didnt check' jet size, so I dint know but would guess standard..