collector box removal NC24

[steveof]

Hi all,going to be removing the collector box on my NC24 soon,do i have to remove the engine to do this or is it possible to get the rear downpipes off by removing the rear shock....Thanks .Steve

[Neosophist]

Engine out job.

It'll hit the swining arm otherwise.

Might be possible other ways but i've always dropped the engine as quoted in the Honda service manual, also not heard of anyone doing it any other way..

[connor73]

If you cut the rear pipes off so the collector comes loose under the bike, you can get them off the engine by taking the shock out but you can't get the new one in with out removing the engine. Just done it myself heres my rebuild blog.

http://therandommusingsofconnor73.blogspot.com/

Truth be told its a right pain in the ass but I did it in a day on my own so anythings possible.

[steveof]

looks like engine out then...do i need any special tools to do this..i seem to remember reading somewhere that you do......Thanks for the reply`s. Steve........oh and nice bike youv`e got there Connor.

[connor73]

nope no special tools, just new gaskets for the headers, be careful where you support the engine when you drop it other wise you won't be able to get the new collector in place.




I didn't take it out all the way just far enough to get the new one in.

[Neosophist]

You have 4 bolts in the back of your NC24!?

There shoudln't be any in the back.. is the plastic broken? I've seen quite a few with nuts and bolts there...

[connor73]

You have 4 bolts in the back of your NC24!?

There shoudln't be any in the back.. is the plastic broken? I've seen quite a few with nuts and bolts there...

Where abouts do you mean?

[Neosophist]

You have 4 bolts in the back of your NC24!?

There shoudln't be any in the back.. is the plastic broken? I've seen quite a few with nuts and bolts there...

Where abouts do you mean?

There shouldn't be ANY bolts or nuts in the rear.

It just looks broken and bodged like that

If all the lugs are intact the rear should look like this...

[steveof]

Thanks for the reply`s all......just come across a small problem,i thought i had found a supplier for a new collector box but phoned them today,only to be told they hadn`t had any in stock for some time ...so does anyone know where i might find one....please..............................................Steve

[BillingCBR]

I heard Motad were working on their mk2 version for the NC24, the mk2 systems don't require engine removal ti get the collector box out IIRC Chownsy is the person to speak to, I recall he had spoken with them on another forum