Nc24 oil level help please

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
sp00ka
Settled in member
Posts: 102
Joined: Sat Apr 02, 2011 8:06 pm
Nc24 oil level help please

Post by sp00ka »

When checking the oil with the bike up right ! Do I measure the oil be resting the dip stick on the threads or screw back in ? And if low what's the best oil to use ?
hardnutdvd
Regular Member
Posts: 608
Joined: Fri Jan 01, 2010 8:50 pm
Bike owned: RVF400 NC35
Location: Bedford, Bedfordshire
Re: Nc24 oil level help please

Post by hardnutdvd »

if its the same as the 30 and 35, and i would presume it is, its resting it in. not screwing it back in... most on here will say semi synth rather than fully synthetic...
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Nc24 oil level help please

Post by Neosophist »

Resting.

Take it out, wipe it and measure it resting.

Make sure the bike is upright and level, not on the side-stand.

10-40. Semi Synth bike oil is fine.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
sp00ka
Settled in member
Posts: 102
Joined: Sat Apr 02, 2011 8:06 pm
Re: Nc24 oil level help please

Post by sp00ka »

Thanks guys , it's been reading right on the full Mark screwed in and resting it's reading on the low limit :( better fill it up , thanks

Post Reply