Nc21-Nc24 Pushrod

Post by **thunderace** » Mon Sep 27, 2010 11:26 am

If you can get me the dimensions, I may be able to get a stainless one machined up if it would be any better?

gissmo50 · Post by **gissmo50** » Mon Sep 27, 2010 12:29 pm

bike is in my parents garage at the moment wont be getting back up there till next weekend will have a measure up then let you know, should be able to buy some stainless rod the right diameter and cut it to length tho,

Post by **thunderace** » Tue Sep 28, 2010 9:22 am

Fair enough. Just take it easy when you shape the end

peatah · Post by **peatah** » Mon Jul 11, 2011 3:09 pm

It could be ive got an nc21 clutch rod fitted to mine
i didnt notice the length difference when i swapped mine out as it was bent
so iof any one want to swap I need a clutch rod for an NC24 or the length so I can make one

Thanks in advance

Pete

Post by **Neosophist** » Tue Jul 12, 2011 11:27 am

peatah wrote:It could be ive got an nc21 clutch rod fitted to mine
i didnt notice the length difference when i swapped mine out as it was bent
so iof any one want to swap I need a clutch rod for an NC24 or the length so I can make one

Thanks in advance

Pete

The NC24 rod is shorter than the NC21 by about 15mm..

Nc21-Nc24 Pushrod

Re: Nc21-Nc24 Pushrod

Re: Nc21-Nc24 Pushrod

Re: Nc21-Nc24 Pushrod

Re: Nc21-Nc24 Pushrod

Re: Nc21-Nc24 Pushrod