End can sealant

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
emto
Settled in member
Posts: 116
Joined: Wed Apr 30, 2008 4:17 pm
End can sealant

Post by emto »

I've an NC30 with a half Ethos system. The end can was dismantled before I bought it to put in extra packing but it was badly resealed at both ends of the can. As a result the can is blowing a lot at both ends.
Is there any product off the shelf that I could get to reseal it without having to dismantle it?
Top
fastdruid
Regular Member
Posts: 893
Joined: Wed Apr 30, 2008 7:39 pm
Re: End can sealant

Post by fastdruid »

You could try some silicon sealant, I think anything else is going to look crap or require it taking apart.

Druid
Top
Simon_Ed
Site Supporter
Site Supporter
Posts: 246
Joined: Thu May 22, 2008 8:04 pm
Contact:
Contact Simon_Ed
Re: End can sealant

Post by Simon_Ed »

take it in bits and do it properly, saves pissing around with it later on it stops it looking like a 5 year old did it. :D
Top
Post Reply

Return to “Honda - Workshop”