NC23 rear bearing removal..

DK-Tandy · Post by **DK-Tandy** » Fri Jul 01, 2011 11:24 am

how the fuck do you remove the bearings?..

ive read the haynes and followed it but its like the bearings have seized and wont budge.. it took me half an hour just to remove the collars..

Post by **CMSMJ1** » Fri Jul 01, 2011 11:46 am

take it to a shop and they'll do it ..or buy the right tools....

amorti · Post by **amorti** » Fri Jul 01, 2011 11:54 am

Wheel bearings? Piece of piss mate.

Bit like this?
http://www.youtube.com/watch?v=obPQMiQg ... er&list=UL

DK-Tandy · Post by **DK-Tandy** » Fri Jul 01, 2011 1:19 pm

Amorti, i tried that, they have failed to budge.. i'll have another go and see if i can get somewhere.

DK-Tandy · Post by **DK-Tandy** » Fri Jul 01, 2011 1:51 pm

i had another go, i got one out, the bigger one. with the other side, the walls in which the bearing lies in seems uneven preventing the bearing from coming out.. any idea's on how to get out?

does it mean the wheel is scrap because of getting old bearing out and new bearing in?

DK-Tandy · Post by **DK-Tandy** » Fri Jul 01, 2011 2:22 pm

removed it now..

i used the video technique for the sprocket side bearing then for the brake side bearing i fitted a 3/4 socket onto a extension bar i hit that. it fits just nicely and soon removes it with a bit of force :)

Post by **Delboy** » Fri Jul 01, 2011 8:13 pm

Well done

NC23 rear bearing removal..

NC23 rear bearing removal..

Re: NC23 rear bearing removal..

Re: NC23 rear bearing removal..

Re: NC23 rear bearing removal..

Re: NC23 rear bearing removal..

Re: NC23 rear bearing removal..

Re: NC23 rear bearing removal..