Shiney bits!!!!*
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Vfr400/tbird
- Settled in member
- Posts: 92
- Joined: Sun Mar 27, 2011 7:19 pm
- Bike owned: VFR400 NC21 Thunderbird 900
- Location: West huntspill Somerset
Shiney bits!!!!*
I'm looking at replacing my old slightly bent brake and clutch levers on my nc21 with some new ones, but can't find anythink other than the stock oem parts, I would like gold ones to match the colours of the bike any ideas where I can get some from?
-
porndoguk
- Site Supporter
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: Shiney bits!!!!*
http://cgi.ebay.co.uk/HONDA-VFR400-NC30 ... 5acf3cf625
http://cgi.ebay.co.uk/Clutch-levers-Hon ... 483cfd960c
http://cgi.ebay.co.uk/Clutch-levers-Hon ... 483cfd960c
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
-
Vfr400/tbird
- Settled in member
- Posts: 92
- Joined: Sun Mar 27, 2011 7:19 pm
- Bike owned: VFR400 NC21 Thunderbird 900
- Location: West huntspill Somerset
Re: Shiney bits!!!!*
These look like they'd fit right in with the styling, but they are listed as nc30 parts!
The nc21 has a hydraulic clutch and in pictures (not sure) the brake master cylinder looks very diffrent on the nc30!
Is it possible the vfr750 clutch lever would fit?
If not I'll go down the route of getting new nc21 oem ones and take them to be powder coated I think they charge about £8 each lever so about 15 with the price of the lever!
The nc21 has a hydraulic clutch and in pictures (not sure) the brake master cylinder looks very diffrent on the nc30!
Is it possible the vfr750 clutch lever would fit?
If not I'll go down the route of getting new nc21 oem ones and take them to be powder coated I think they charge about £8 each lever so about 15 with the price of the lever!
-
Will
- Settled in member
- Posts: 118
- Joined: Sun Feb 27, 2011 11:02 am
- Bike owned: Honda RVF400
- Location: Sydney, Australia
Re: Shiney bits!!!!*
tygas got some nice levers!