NC31 - Torque figures for front wheel?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PB1
- Settled in member
- Posts: 21
- Joined: Mon Jun 20, 2011 6:54 pm
- Bike owned: NC31
- Location: Colchester
NC31 - Torque figures for front wheel?
Anybody got the torque setting figures for the front wheel spindle nut, the pinch bolts, and the front caliper bolts on a Superfour NC31 please?
-
CMSMJ1
- Moderators
- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC31 - Torque figures for front wheel?
pinch are 12nm
caliper 20nm and off the top of my head..we're looking at 60nm for the axle
Check the haynes for it I reckon
caliper 20nm and off the top of my head..we're looking at 60nm for the axle
Check the haynes for it I reckon
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
PB1
- Settled in member
- Posts: 21
- Joined: Mon Jun 20, 2011 6:54 pm
- Bike owned: NC31
- Location: Colchester
Re: NC31 - Torque figures for front wheel?
Okay thanks very much - the manual I have is the one translated from Russian and it only goes up to page 60 something, so I think it's missing the wheels/brakes/suspension sections.
When you say the Haynes manual, do you mean the generic Motorcycle Maintenance Manual they do? If so, I didn't realise it was specific enough to give such info - I'll have to get one. Thanks.
When you say the Haynes manual, do you mean the generic Motorcycle Maintenance Manual they do? If so, I didn't realise it was specific enough to give such info - I'll have to get one. Thanks.