K Model Suspension Spanner
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Man_Named_Dave
- Site Supporter
- Posts: 359
- Joined: Mon Apr 26, 2010 5:41 pm
- Bike owned: NC30(K)
- Location: Nairn, Highlands
K Model Suspension Spanner
Can anyone recommend a C-spanner that fits the standard K rear shock? Unless I'm being a total retard and the chain spanner fits it...
Plus, I found out on my MOT that these hollow discs/thingies are supposed to rotate freely, apparently.
Nice to have my MOT done by a former NC30 owner.
Plus, I found out on my MOT that these hollow discs/thingies are supposed to rotate freely, apparently.
Nice to have my MOT done by a former NC30 owner.
-
BillingCBR
- Site Supporter
- Posts: 1043
- Joined: Sat Oct 10, 2009 10:36 pm
- Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: K Model Suspension Spanner
The chain spanner should fit I think, just use the inner tooth :)
The proper name for those discs/thingies is bobbins I believe
The proper name for those discs/thingies is bobbins I believe
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Neosophist - The NC30 doesn't go very well when it's on fire
-
Man_Named_Dave
- Site Supporter
- Posts: 359
- Joined: Mon Apr 26, 2010 5:41 pm
- Bike owned: NC30(K)
- Location: Nairn, Highlands
Re: K Model Suspension Spanner
Cheers Billing, got the inner tooth working with just about enough space to get some leverage on it.
It was wedged onto 7, so hopefully dropping it to 5 will make things a little less uncomfortable.
It was wedged onto 7, so hopefully dropping it to 5 will make things a little less uncomfortable.