Hi i have bought carbon air scoops and front tank cover but when i took the old ones off they were held on with wood screws, I'm guessing it should be a nut and bolt each side but does any one know where i can get the right nuts & bolts from?
Also on the old air scoops there was a bit of rubber going around the bottom does anyone know where i can get that from?
I would be really thankful if anyone does know as when i went into honda they said they don't sell bits like that.
air scoops to tank cover
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
isca1987
- Site Supporter
- Posts: 100
- Joined: Sun May 15, 2011 6:56 pm
- Bike owned: Nc30
- Location: Exeter
-
BillingCBR
- Site Supporter
- Posts: 1043
- Joined: Sat Oct 10, 2009 10:36 pm
- Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: air scoops to tank cover
at a Honda dealer, tell them you want 2 of 64121MR8900, should be about a fiver each, that or go on DavidSilverSpares.co.uk an put that in the search by part number section.
The screws could be panel screws, which do look like wood screws, the proper ones are available from DSS, but are special order, 2 of 90101692000 will see you right
EDIT: Both are special order, the total delivered including VAT is £15.08
The screws could be panel screws, which do look like wood screws, the proper ones are available from DSS, but are special order, 2 of 90101692000 will see you right
EDIT: Both are special order, the total delivered including VAT is £15.08
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Neosophist - The NC30 doesn't go very well when it's on fire