MPH overlay

[rickee]

Hi all,

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... _600wt_906

Just found this overlay on ebay, spacing looks ok to me, with about 81mph directly across from 0 (130kph is in this position on my CBR's clocks) and horizontal looks to be about 43mph/ 70 kph.

I've asked the seller about the OD but in terms of numbers on the dial it looks right to me. Does it look right to anyone else?

Rich

[Davez29]

Hey rickee head over to the vfr forum and check out their request for peeps who want to buy this type of thing as they want to buy in bulk, I think they would fit the CBR but im not 100% certain. BTW these replace your dial not stick to the clock.

I was thinking about it but the only thing put me off was that I use a blue converter that converts my speedo and odo to mph/milage and by using an overlay I would futher muck up my odo readings as I think the odo would revert back to kilometres although the speedo would show mph correctly of course.

[xray_griff]

My wife has been looking for a speedo overlay sticker for her bike, but can't find one. Also, doesn't want to put a converter on, don't want to mess with the odo. So she has laminated a piece of paper with the MPH to KPH conversions and tie wrapped it to the yoke, it's more for quick reference.

Griff

[rickee]

the GSXR750 overlay from that seller fits perfectly and lines up on the marks properly. only one a little out is 70mph which gives a slight over read (i.e. on the 70mph mark you ar doing 69 mph ish.

Perfect and only £6 :)

[xray_griff]

Great, thanks for letting us know, will have to get one.

Cheers
Griff