Fork seal help? SP or Standard

irish_liquor · Post by **irish_liquor** » Thu Jun 09, 2011 5:06 pm

Hi, Im about to change the fork seals and the forks arent of the frame im using. Im unsure whether they are standard or SP forks.

Is there a way to tell the difference so i put the correct amount of oil in them?

Also i only brained 250ccm / ml from each fork

cheers Col

Post by **dobbslc** » Sun Jun 12, 2011 10:00 pm

The sp forks will have adjusters on the bottom of the legs by the wheel spindle & on the top in the large 17mm preload adjusters.
390mm of oil, 97mm air gap for the standard forks. I've used 10w oil in mine.

stripes1976 · Post by **stripes1976** » Tue Jun 14, 2011 7:03 pm

my fork seal guide is on the download page of this site.

Armi400 · Post by **Armi400** » Fri Jun 17, 2011 8:14 am

stripes1976 wrote:my fork seal guide is on the download page of this site.

Ok i'm stupid and can't find it.....any links please Stripes, please mate.....cheers!

ben2306 · Post by **ben2306** » Fri Jun 17, 2011 8:19 am

i also cant seem to find.
whats download page of the site?

Post by **morris147** » Fri Jun 17, 2011 11:32 am

http://www.400greybike.com/docs.htm

Armi400 · Post by **Armi400** » Sat Jun 18, 2011 9:01 am

Thankyou Morris............Hidden treasures in here.....lol.

Fork seal help? SP or Standard

Fork seal help? SP or Standard

Re: Fork seal help? SP or Standard

Re: Fork seal help? SP or Standard

Re: Fork seal help? SP or Standard

Re: Fork seal help? SP or Standard

Re: Fork seal help? SP or Standard

Re: Fork seal help? SP or Standard