FAO Tyga Twin Stack owners

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
BillingCBR
Site Supporter
Site Supporter
Posts: 1043
Joined: Sat Oct 10, 2009 10:36 pm
Bike owned: '88 NC23, NC30, '98 R1, NC35
FAO Tyga Twin Stack owners

Post by BillingCBR »

Hiya,

Could someone with a Tyga twin stack system do me a favour and measure the inlet diameter of the end cans please? I'm thinking of buying a pair of short cans for my TSR system and Tyga are looking to be the best option if they're small enough to fit :)
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Top
tygapaul
Settled in member
Posts: 114
Joined: Fri May 02, 2008 7:09 am
Re: FAO Tyga Twin Stack owners

Post by tygapaul »

1 1/2" (38.1mm) is th ID of the silencer where it joins the system.
Top
User avatar
BillingCBR
Site Supporter
Site Supporter
Posts: 1043
Joined: Sat Oct 10, 2009 10:36 pm
Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: FAO Tyga Twin Stack owners

Post by BillingCBR »

Thanks Paul, may be in contact about getting some cans for my TSR system then, I'm after 100mm diameter carbon cans, with the 1 1/2 inch inlet, shorter than normal (300mm?) and a badge on each side (got a can on each side of the bike)

Do you have something off the shelf I could buy that would suit the requirements above at all? They definately need to be shorter than the cans I have atm though :up:
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Top
Post Reply

Return to “Honda - General”