nc35 nose cone fitting question
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
domski1
- Settled in member
- Posts: 58
- Joined: Thu Mar 31, 2011 7:31 pm
- Bike owned: Rvf nc35
nc35 nose cone fitting question
Right maybe another daft question from myself but my nose cone does not have a hole drilled in it just above the headlights to fasten it to the clock mounting bracket. would this be due to it been an after market panel? Anyway could anyone post a cclose up picture of the hole and fastening so i could get mine sorted? I am guesing there is quite a large hole with a rubber grommet in then a washer and bolt? On the pictures i have seen the hole seems to be resessed in a little which could also be a problem to me. Anyway any input would be as always appreciated, thanks. 
-
domski1
- Settled in member
- Posts: 58
- Joined: Thu Mar 31, 2011 7:31 pm
- Bike owned: Rvf nc35
Re: nc35 nose cone fitting question
Ok, I have sussed it out, the previous owner must have had a screw loose or something, the hole had been filled over and painted. I started to drill a hole and realised it was filler so very carefully a picked it out! Will need painting but at least I have a decent nose cone, will also need to source the correct bolt and grommet for the hole.
