Rear foot pegs
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Andy_Edw
- Settled in member
- Posts: 101
- Joined: Thu Jan 27, 2011 3:34 am
- Location: Location Location
Rear foot pegs
I have just went to fit my rear foot pegs on my RVF but on the left hand side one, it has a exhaust hanger attached,Which isn't needed because i only have a little stubby can,Has anyone tried cutting the exhaust hanger bit off the footrest?
-
BillingCBR
- Site Supporter
- Posts: 1043
- Joined: Sat Oct 10, 2009 10:36 pm
- Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: Rear foot pegs
couldn't you just use one from a VFR? I have a spare hanging around if you want to try it :)
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Neosophist - The NC30 doesn't go very well when it's on fire
-
amorti
- Regular Member
- Posts: 957
- Joined: Sun May 18, 2008 4:51 pm
- Bike owned: CB-1, MSX125
- Location: Gibraltar
Re: Rear foot pegs
I did this on a 600 Divvy. Easy enough, hacked it off using a disc cutter and as it's alloy you could polish it to a shine, though on the Divvy I never bothered.
Wasn't there a thread about fitting nc29 "stealth" rear pegs?
Wasn't there a thread about fitting nc29 "stealth" rear pegs?
-
Andy_Edw
- Settled in member
- Posts: 101
- Joined: Thu Jan 27, 2011 3:34 am
- Location: Location Location
Re: Rear foot pegs
Cheers but I've sorted it now,just cut it off, looks fine :)BillingCBR wrote:couldn't you just use one from a VFR? I have a spare hanging around if you want to try it :)