Aftermarket wheels for nc29 ?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
adam24
Settled in member
Posts: 14
Joined: Tue Jul 29, 2008 5:55 am

Aftermarket wheels for nc29 ?

Post by adam24 » Mon Aug 11, 2008 1:40 am

do any comapnies lik marvic, dymag, pvm, marchesini (sp?) etc make wheels to fit the nc29 ? Ive seen a white nc29 with white marvic's on it some where on the web but i cant find it ? Can u go any bigger on the wheel size like a 5.0 in wide wheel as opposed to the stock 4.5 in wide wheel ?
Top
garyboy_palaboy
Familiar Member
Posts: 267
Joined: Sun May 04, 2008 9:43 am

Re: Aftermarket wheels for nc29 ?

Post by garyboy_palaboy » Mon Aug 11, 2008 3:19 pm

adam24 wrote:do any comapnies lik marvic, dymag, pvm, marchesini (sp?) etc make wheels to fit the nc29 ? Ive seen a white nc29 with white marvic's on it some where on the web but i cant find it ? Can u go any bigger on the wheel size like a 5.0 in wide wheel as opposed to the stock 4.5 in wide wheel ?

i think theres dymag that can fit to our nc29's....


.
Top
davidsimon10
Settled in member
Posts: 17
Joined: Fri May 02, 2008 10:11 am

Re: Aftermarket wheels for nc29 ?

Post by davidsimon10 » Tue Aug 12, 2008 1:06 pm

hello both marvic and dymag make sets that will fit with a bit of modification fronts go straight in but the rears needed about an hour each on the lathe to make spacers to fit colin martin with bemsee has a set on each bike . the marvic pentas are lighter but harder to make fit .
Top
adam24
Settled in member
Posts: 14
Joined: Tue Jul 29, 2008 5:55 am

Re: Aftermarket wheels for nc29 ?

Post by adam24 » Wed Aug 13, 2008 5:41 am

which dymags, and how big is the rear wheel, 5.5 ??
Top
Post Reply

Return to “Honda - General”