rear caliper snapped HELP!!!!!!

Post by **rswspeed1** » Mon Aug 11, 2008 8:10 pm

hi, my nc30 had been standing for 2 years without being touched and i decided to get it back on the road, got it running with no problems but when i took it down the road and back i noticed the rear caliper was hanging down, so i took it off and the alloy on the caliper had snapped in the centre, so i bought another caliper but it wont go on its as if the hub has dropped down or the bracket moved up but cannot see anything obvious.
i have nothing to compare it with.
any ideas????
thanks

Post by **billnit** » Mon Aug 11, 2008 10:02 pm

Hi

I had this exact same thing.

Whats happened is that the eccentric hub has dropped down as you say. Prob like that from when you put it away last.

Managed to make a mess of my caliper and snapped the mounting bracket.

From what i remember you need to get it on a paddock stand and the wheel off. Undo the pinch bolt and you should be able to rotate the hub (as if tightening the chain)

If its as i think it is then it should be self explanatory.. been a while since it happened to me now.

The hub was tightened in the highest position. When i then went out and over a few bumps, the weight of the bike pushed the hub back down, snapping the caliper mount.

Sorry if this is a bit long winded as trying to describe how i saw it from memory (a poor one at that too!)

Let me know how you get on.

If you need a replacement caliper mount, i got mine from Graeme France....

Post by **rswspeed1** » Mon Aug 11, 2008 10:43 pm

thanks for the quick reply will have a look, sounds as if thats whats happened does it matter which position i leave the hub at? e.g the pinch bolt is at 3 o clock is this the normal position
thanks

Carlos · Post by **Carlos** » Tue Aug 12, 2008 2:16 am

There used to be a usefull article about this on the old forum, perhaps one of the admins can access this or has it saved maybe?
Earth to viper.....earth to viper ........come in please.

fastdruid · Post by **fastdruid** » Tue Aug 12, 2008 8:12 pm

I've got an entire NC30 swingarm/hub etc I'm going to stick on ebay, give me a PM if you're interested in it before I list it.

Druid

Post by **rswspeed1** » Wed Aug 13, 2008 12:34 am

ive had a quick look and i think what has happened is that the chain is rusted and theres a couple of kinks there and is very tight so when i took it down the road it has forced the hub down, so ive just ordered a new chain for 30 quid delivered next day (hopefully) so give me a couple of days and ill let you know how i got on.
druid - will let you know in a couple of days if i need it (i hope not) thanks

rear caliper snapped HELP!!!!!!

rear caliper snapped HELP!!!!!!

Re: rear caliper snapped HELP!!!!!!

Re: rear caliper snapped HELP!!!!!!

Re: rear caliper snapped HELP!!!!!!

Re: rear caliper snapped HELP!!!!!!

Re: rear caliper snapped HELP!!!!!!