New paint job.. met its nemesis

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
iArGod
Settled in member
Posts: 70
Joined: Wed Feb 23, 2011 1:21 pm
Bike owned: NC30
Location: Devon
New paint job.. met its nemesis

Post by iArGod »

Paint shrapnel.

I believe on the painting of my fuel tank bits of paint have gone inside and how clogging up my poor nc30!
The bike is fine stationary, but when any throttle is added makes the engine sound horrible past 4k Revs and when riding has no pull ( only testing the bike up and down the road when i first discovered this )

My solution to this was only to track down the lines hoping to clean it all out!

Fuel tap has been removed and cleaned, the lines leading to the carbs have been cleaned, i tried removing the carbs earlier but had some troubles.
I am unable to detach the hoses underneath the carbs.



First of all, am i on the right lines or going about this wrong?
Secondly any tips to removing the carbs?


Thanks

Keir
User avatar
Hadies
Site Supporter
Site Supporter
Posts: 606
Joined: Tue Mar 16, 2010 1:20 am
Bike owned: NSR125, NC30, Daytona 675
Location: Washington, Tyne and Wear
Re: New paint job.. met its nemesis

Post by Hadies »

Have you loosened off the jubilee clips holding the carb rubbers? Once you've done that put something under the carbs like a piece of wood and use it as leverage to lift it off.
If you're certain that paint has managed to get into the tank then it's more than likely blocked up the carbs.
iArGod
Settled in member
Posts: 70
Joined: Wed Feb 23, 2011 1:21 pm
Bike owned: NC30
Location: Devon
Re: New paint job.. met its nemesis

Post by iArGod »

Thats what i cant seem to get off, its in a real awkward place to get to.

I drained the carbs but nothing came out but the petrol of course ( the screw is in a mighty awkward position aswell )

Post Reply