Socket sizes & torq settings.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
rob b
Settled in member
Posts: 111
Joined: Wed Sep 15, 2010 10:46 pm
Bike owned: nc30
Location: anglesey, north wales
Contact:
Contact rob b

Socket sizes & torq settings.

Post by rob b » Mon Apr 25, 2011 10:48 am

Hi All.
Could you please let me know what size socket I need for the front & rear wheel I need to take them off & allso the torq setting as well.
Thanks.

Rob.
Top
User avatar
BillingCBR
Site Supporter
Site Supporter
Posts: 1043
Joined: Sat Oct 10, 2009 10:36 pm
Bike owned: '88 NC23, NC30, '98 R1, NC35

Re: Socket sizes & torq settings.

Post by BillingCBR » Mon Apr 25, 2011 2:23 pm

Front - 24mm (I think) and 60nm for the axle nut, and 12mm and 22nm for the axle pinch bolts in the fork legs.

Rear - 36mm socket, 120nm for the wheel bolt 46mm and 165nm for the hub assembly nut
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Top
rob b
Settled in member
Posts: 111
Joined: Wed Sep 15, 2010 10:46 pm
Bike owned: nc30
Location: anglesey, north wales
Contact:
Contact rob b

Re: Socket sizes & torq settings.

Post by rob b » Mon Apr 25, 2011 6:11 pm

Thats grt.
Thank you i'm very gretfull.

Rob :grin: :grin:
Top
Post Reply

Return to “Honda - Workshop”