Bad missfire! Need help

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Scarth
Settled in member
Posts: 18
Joined: Fri Feb 25, 2011 7:33 pm
Bike owned: Daytona 675,Husaberg,Track Nc
Location: North yorkshire
Contact:
Bad missfire! Need help

Post by Scarth »

Just got my track bike about ready and running, went for a nip up the road and once it gets up to around 5500 rpm it develops a really bad misfire and wont pull any more feels really bad.

I've changed the coil off my tyga bike but no difference still rubbish
Changed the plugs and even tried a second hand csi I had in the shed

Nothing seems to cure it need some ideas now please.
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7161
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Bad missfire! Need help

Post by CMSMJ1 »

You need to fit your speedo again... ;)

Or, research the "resistor mod" to stop the CDI thinking the speedo is missing..

Nothing too difficult to sort... :rocks:
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Scarth
Settled in member
Posts: 18
Joined: Fri Feb 25, 2011 7:33 pm
Bike owned: Daytona 675,Husaberg,Track Nc
Location: North yorkshire
Contact:
Re: Bad missfire! Need help

Post by Scarth »

Resistor mods sounds like exactly what I need as I took speedo off cheers mate

Just need the 2k resistor now to fit
Scarth
Settled in member
Posts: 18
Joined: Fri Feb 25, 2011 7:33 pm
Bike owned: Daytona 675,Husaberg,Track Nc
Location: North yorkshire
Contact:
Re: Bad missfire! Need help

Post by Scarth »

Resistor modnworked a treat mate ur a legend
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7161
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Bad missfire! Need help

Post by CMSMJ1 »

Bonus... :rocks:
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

Post Reply