NC30 basic maintainance?

laurence_13 · Post by **laurence_13** » Sat Mar 19, 2011 7:12 pm

Right, got my vfr all cleaned up and put some new stickers on while waiting for a few other bits to come through... just want some advice on basic things, what to check, how much oil and coolant to put in etc... anyone got any tipss?

Post by **Drunkn Munky** » Sat Mar 19, 2011 7:19 pm

Sounds like you need the haynes manual my friend

Post by **lizard821000** » Sat Mar 19, 2011 7:21 pm

stickers are deffo the best performance up-grade you can have tbf lol

haynes laddy.

laurence_13 · Post by **laurence_13** » Sat Mar 19, 2011 7:27 pm

Drunkn Munky wrote:Sounds like you need the haynes manual my friend

i'm already skint after leathers etc, only need how much coolant to put in etc, other than that dad's head's the manual, and google of course

lizard821000 wrote:stickers are deffo the best performance up-grade you can have tbf lol

haynes laddy.

i know, should get about 10bhp from them, plus about 16 from the gold powerbands i added, meant to give it a bit more grunt off the line....

luckily i'm joking, but surely someone with a haynes manual can give me the oil and coolant amounts?

Post by **Drunkn Munky** » Sat Mar 19, 2011 7:30 pm

off thre top of my head i think its 2,4l. just fill the coolant up to the top, ive never measured the coolant.

Post by **Delboy** » Sat Mar 19, 2011 7:31 pm

Coolant has a min/max line and to check oil undo dipstick, clean then put back in the hole without screwing it in, again, has a min/max mark on the dipstick. :google:

laurence_13 · Post by **laurence_13** » Sat Mar 19, 2011 7:48 pm

vfrderek wrote:Coolant has a min/max line and to check oil undo dipstick, clean then put back in the hole without screwing it in, again, has a min/max mark on the dipstick.

d'oh didn't even think of that... too used to my montesa 314, got no dipstick aha

Drunkn Munky wrote:off thre top of my head i think its 2,4l. just fill the coolant up to the top, ive never measured the coolant.

okay thankyou

amaechizzle · Post by **amaechizzle** » Sun Mar 20, 2011 1:04 am

Cooling circuit is about 1.2 - 1.5L

laurence_13 · Post by **laurence_13** » Sun Mar 20, 2011 9:50 am

amaechizzle wrote:Cooling circuit is about 1.2 - 1.5L

okay

now i'm confused

2.4 or 1.2-1.5

Post by **Hadies** » Sun Mar 20, 2011 9:56 am

2.4 engine oil. 1.2-1. 5 coolant.

NC30 basic maintainance?

NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?

Re: NC30 basic maintainance?