Wanted: NC29 rear wheel spacers.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Jakey Boy
- Settled in member
- Posts: 33
- Joined: Sun May 04, 2008 8:21 am
Wanted: NC29 rear wheel spacers.
Need these so I can get a 29 wheel into my 23 asap, anyone got a spare set lying around I can swap for moneys?
Or even just the dimensions would be grand.
Cheers.
Or even just the dimensions would be grand.
Cheers.
-
stimpy
- Familiar Member
- Posts: 369
- Joined: Fri May 02, 2008 11:05 am
Re: Wanted: NC29 rear wheel spacers.
they are 10mm wide per side...you could copy the 23's dimentions for shape.
stimpy
stimpy
-
Jakey Boy
- Settled in member
- Posts: 33
- Joined: Sun May 04, 2008 8:21 am
Re: Wanted: NC29 rear wheel spacers.
Cheers Stimpy, if I've got time now I should be able to make my own.
I did wonder if I placed the 29 wheel in the swing arm and took some measurements I could make some from that, but the swing arm 'opens' fractionally as you slacken the spindle nut so I figured that wouldn't be any good.
I did wonder if I placed the 29 wheel in the swing arm and took some measurements I could make some from that, but the swing arm 'opens' fractionally as you slacken the spindle nut so I figured that wouldn't be any good.