NC30: Swingarm mod for rear brake line

[mattUKNC]

Has anyone got any pointers/ how to guide?
I tried to search but 'swingarm' brings up too many results!!!

[reverse cylinder jim]

Not done it myself but try this mate
http://www.akhara.com/nc30/nc30rearbrakeline/index.html
James

[Delboy]

Not done it yet either, found this http://projectvfr.com/progress/changes- ... -re-route/
I know it's for an 800 but lots of ideas.

[STYLER]

Porndoguk has done the hidden cable in swingarm mod which looks really neat...if thats what your after.

Heres post link:

viewtopic.php?f=24&t=23940&start=0&hilit=swingarm

[lizard821000]

??? eh, what wrong with the rear line then? lol im just about to order some hel braided....does the single arm stop the line travel or somin, excuse the ignorance, i dont know.

[mattUKNC]

Porndoguk has done the hidden cable in swingarm mod which looks really neat...if thats what your after.

Heres post link:

viewtopic.php?f=24&t=23940&start=0&hilit=swingarm

That's what I was looking for, thanks.
Just had a new swingarm arrive today to prepare for the rear hub mod that should be happening at some point so thought I'd do this too while it's all off.

[STYLER]

??? eh, what wrong with the rear line then? lol im just about to order some hel braided....does the single arm stop the line travel or somin, excuse the ignorance, i dont know.

A lot of people on here simply route the brake line through the swingarm body as it hides it, looks neater, and possibly makes it easier to clean the swingarm, but its mainly a style thing!!!

The rear brake isnt very good so most people replace it with a standard length braided line which can either be routed the same as the standard rubber line or through the swingarm with 2 drilled holes and rubber grommets added to help seal the hole and protect the line.

[lizard821000]

ahhhh, cheers man.

[porndoguk]

have stacks of pics on facebook

but other than that head over to my bike project here

viewtopic.php?f=62&t=23204