Question Service Manual NC30

atac · Post by **atac** » Wed Mar 02, 2011 9:05 am

I want to buy a service manual for the NC 30. 2 Types:
- HONDA OEM factory workshop manual (akhara doesn not show all parts:-(
-haynes Service&repair manual

Which one is better and have more infos, probably the oem Honda one?
Thanks for help

Post by **Malc** » Wed Mar 02, 2011 9:11 am

There are some who claim the Haynes manuals are full of inaccuracies, etc. but for routine maintenance they are spot on - clear concise instructions on how to do things. Unless you're looking for a complete nut and bolt rebuild then Haynes would be fine. Mind you, I've done several nut and bolt rebuilds including full engines with only Haynes to guide me, and they haven't let me down yet, so...

banoffee · Post by **banoffee** » Wed Mar 02, 2011 12:04 pm

a free Honda one from t'internet

Post by **Cru Jones** » Wed Mar 02, 2011 5:55 pm

banoffee wrote:a free Honda one from t'internet

That's ok if you can live with shoddy image quality. I got one from David Silver, which is unfortunately a copy of the English VFR400RLM manual, but is still better than the ones you can d/l form the interwebs. I'd like to get an original. IMO Honda service manuals are very good. The Haynes is, meh, ok. I wish someone would translate the NC35 manual.

Post by **Cammo** » Wed Mar 02, 2011 10:17 pm

Cru Jones wrote:I got one from David Silver, which is unfortunately a copy of the English VFR400RLM manual, but is still better than the ones you can d/l form the interwebs. I'd like to get an original.

Best bet is to keep an eye on ebay or put a wanted in the classifieds here perhaps. It might be a bit difficult to get hold of an original.

Question Service Manual NC30

Question Service Manual NC30

Re: Question Service Manual NC30

Re: Question Service Manual NC30

Re: Question Service Manual NC30

Re: Question Service Manual NC30