I use the 2003 - 2005 model.
After this they change to more pins.
no dipped beam nc30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: no dipped beam nc30
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
krisztian_andre
- Familiar Member
- Posts: 484
- Joined: Fri Oct 02, 2009 6:49 pm
- Bike owned: MG v35 II, NC30, MG NF Mil.
- Location: Germany
Re: no dipped beam nc30
I think the generator is the weak point here, the 60w high beam is only used sporadically so it does not load the generator long enaugh to cause it to fail due to overheating wh.ereas the dipped beam is used for etended periods. Also the UK-spec has an oil cooler and the generation is cooled by the engine oil although I think the oil cooler was installed due to many of these export bikes being used for racing.