Alan, didn't I come up and sort that for you the first time??
Kris
NC30 nit starting arrrrrrrrrrgggggghhhhhhhhh
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
-
spooner
- Settled in member
- Posts: 73
- Joined: Sun Mar 28, 2010 12:54 am
Re: NC30 nit starting arrrrrrrrrrgggggghhhhhhhhh
I was stood for about 3 months without bein used but ran fine yesterday and today but was just when the guy came to look at it, it decided not to start. Will give the aerosol a go tomorrow and if it dont start it may do me a favor and cahtc alight 
and yes kris it was and i though it was the same thing so a new set of plugs later it was fine for 2 days i just dont think it wants to be sold
and yes kris it was and i though it was the same thing so a new set of plugs later it was fine for 2 days i just dont think it wants to be sold-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: NC30 nit starting arrrrrrrrrrgggggghhhhhhhhh
Get the plugs out again and clean them. Whip the filter off and bottom case off and spray the carb linkages with wd40 and spray som down the stacks. Check the choke is actually working. Charge the battery overnight and stick some new petrol in the tank. Once it's running take it for a spin for half hour!
I apologise if I have repeated anyone elses advice I've not read the whole thread!
Oh check the vacuum pipe is in the correct nozzle.
Kris
I apologise if I have repeated anyone elses advice I've not read the whole thread!
Oh check the vacuum pipe is in the correct nozzle.
Kris