Tank fitment
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- jamie125
- Site Supporter
- Posts: 112
- Joined: Wed May 14, 2008 9:31 pm
- Location: Leighton Buzzard
Tank fitment
Is there a knack to getting the tank on without it moving once fitted? Or is this normal for the nc30. Have quite a bit of play up the front once its all fitted.
- geebus
- Site Supporter
- Posts: 58
- Joined: Fri Jan 07, 2011 7:56 pm
- Bike owned: 1990 VFR400 NC30 + SV650s
- Location: Inverclyde
- Contact:
Re: Tank fitment
def got the rubber bit on the end bit that is under the seat? Mine moves a little but thats because i dont have the rubber parts that stop the tank hitting the frame...which i really should get.
You get old bikers and bold bikers, but no old bold bikers
- porndoguk
- Site Supporter
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: Tank fitment
Well i never, i didnt know that there was a rubber for that as i dont have onegeebus wrote:def got the rubber bit on the end bit that is under the seat? Mine moves a little but thats because i dont have the rubber parts that stop the tank hitting the frame...which i really should get.
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
-
- Site Supporter
- Posts: 780
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: Tank fitment
jamie , it could be the front rubber where it fits into the frame behind the headstock has dropped inside would take tank off and check it. there should be no movement at the front of the tank side to side if its located correctly .
- jamie125
- Site Supporter
- Posts: 112
- Joined: Wed May 14, 2008 9:31 pm
- Location: Leighton Buzzard
Re: Tank fitment
See I have the rubber bit at the back for the seat but nothing at the front, where would the rubber bit at the front fix to? I thought there should be some sort if rubber bit to stop movement at the front.
Thanks.
Thanks.
-
- Settled in member
- Posts: 211
- Joined: Mon Jun 28, 2010 7:10 pm
Tank fitment
I got the same problem
I bought the front rubber mount from David silver spares and I have no idea how it fits. Could anyone post a pic of there tank with the front mount fitted?
Thanks
I bought the front rubber mount from David silver spares and I have no idea how it fits. Could anyone post a pic of there tank with the front mount fitted?
Thanks
-
- Site Supporter
- Posts: 780
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: Tank fitment
jamie, it fits onto the top of the metal bracket at tank front and between the tank front edge its an awkward bastard to get fitted 9 times out of ten it falls out when reffiting a tank , might be worth taking the tank of the bike and have a look with a torch behind the headstock on the frame had them fall down there myself
if not pretty sure someone on here might have a spare lying around they would sell if you put a wanted in the for sale section.

- jamie125
- Site Supporter
- Posts: 112
- Joined: Wed May 14, 2008 9:31 pm
- Location: Leighton Buzzard
Re: Tank fitment
Dave, thanks for your help! Have been out checking that it hasnt decided to slip down anywhere.... it hasn't
Would I be righ in saying its part 10 on here? http://www.cmsnl.com/honda-vfr400r3-199 ... _1400.html
Thanks.

Would I be righ in saying its part 10 on here? http://www.cmsnl.com/honda-vfr400r3-199 ... _1400.html
Thanks.
- Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: Tank fitment
Yeah thats the one, pm Geoff he's bound to have one, get the 2 side ones while your there if you havent got them, part 12
- jamie125
- Site Supporter
- Posts: 112
- Joined: Wed May 14, 2008 9:31 pm
- Location: Leighton Buzzard
Re: Tank fitment
Yeah ordered two of the side ones as I thought this was the problem but they turned up today and didnt make much of a difference. Will give Geoff a PM see if hes got one lying around
. Once again thanks for the help guys!
