Rocking the HRC Boat?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
phongus
Settled in member
Posts: 59
Joined: Sat Jul 03, 2010 4:41 am
Re: Rocking the HRC Boat?

Post by phongus »

Been told to use these hoses if you want clear hoses that don't crack or fail over time.

http://cgi.ebay.com/ebaymotors/5-16-Tyg ... ccessories

Tygon 2075. They aren't too expensive in my opinion.
Top
User avatar
tanto
Site Supporter
Site Supporter
Posts: 218
Joined: Sat Oct 09, 2010 1:15 am
Bike owned: NC30, Raleigh Chopper
Location: Back in the UK.
Re: Rocking the HRC Boat?

Post by tanto »

Hasn't Tygon 2075 been replaced with Tygon 2375?

Both are on special offer at US Plastic, if you don't mind buying ten feet:

http://www.usplastic.com/catalog/item.a ... &catid=864

and

http://www.usplastic.com/catalog/item.a ... &catid=864

If anyone would like to organise a group buy, I'd like two feet of either type, sent to Thailand. The 5/16” I.D x 7/16” O.D. x 1/16” tubing should fit in place of the HRC tube, and do for the master cylinder reservoir, too.
"A slipping gear could let your M203 grenade launcher fire when you least expect it. That would make you quite unpopular in what's left of your unit." - US Army manual of preventive maintenance.
Top
User avatar
Cru Jones
Site Supporter
Site Supporter
Posts: 199
Joined: Wed Nov 10, 2010 9:47 pm
Bike owned: NC35
Location: California
Contact:
Contact Cru Jones
Re: Rocking the HRC Boat?

Post by Cru Jones »

phongus wrote:Been told to use these hoses if you want clear hoses that don't crack or fail over time.

http://cgi.ebay.com/ebaymotors/5-16-Tyg ... ccessories

Tygon 2075. They aren't too expensive in my opinion.
Now, if you want to talk about mark-up, the above epitomizes it. You can get Tygon 2075 in that size many places for under $2.25/ft.
Top
Post Reply

Return to “Honda - General”