my vfr 400 nc30 project
-
reverse cylinder jim
- Site Supporter
- Posts: 421
- Joined: Sun Feb 28, 2010 5:22 pm
Re: my vfr 400 nc30 project
Did you find that the HRC hose sweats? I bought a hose for the rear and is constantly damp?alexwitham wrote:
this is 'hrc' res hose which you can get from the bay of e.
or banoffee sorted me out some standard black hose, maybe pm him to see if he has any left over?
-
alexwitham
- Site Supporter
- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
Re: my vfr 400 nc30 project
I have one on the front and rear. A little on the rear as its the older hose but nothing that causes any hassle.
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: my vfr 400 nc30 project
Cheers for the info above guy's
Had another serious impulse buy on ebay last night
They are for a triumph but my dad uses a local retired machineist who does things more for something to keep busy rather than make money so it's hopefully not going to cost to much to get them fitted
Had another serious impulse buy on ebay last night
They are for a triumph but my dad uses a local retired machineist who does things more for something to keep busy rather than make money so it's hopefully not going to cost to much to get them fitted
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: my vfr 400 nc30 project
Dymags ruleSpacers and spindles should be all you need, one thing ive noticed tho is the discs are 6 bolt meaning your gunna have to use them discs and move the calipers if need be.
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: my vfr 400 nc30 project
Nice buy, I've seen them up a few times and considered them but I'm sure the rear is something like 7" isn't it??
Kris
Kris
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: my vfr 400 nc30 project
from what i have found on the net the standards are 6" so i assume that these are the same? if they dont fit i will stick them back up on ebay, will just have to wait and see when they get here
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: my vfr 400 nc30 project
Fingers crossed for you mate. I'm looking for a set of 3spokes for my seed.
Tony they are same colour as my 5spokes aren't they? makes me think that the silver was the original colour for my wheels?
Kris
Tony they are same colour as my 5spokes aren't they? makes me think that the silver was the original colour for my wheels?
Kris
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: my vfr 400 nc30 project
whats the biggest rim you can get on the back of a 30? i will be gutted if they are to big.ibby4585 wrote:Fingers crossed for you mate. I'm looking for a set of 3spokes for my seed.
Tony they are same colour as my 5spokes aren't they? makes me think that the silver was the original colour for my wheels?
Kris
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: my vfr 400 nc30 project
Well we thought my Dymags were 6" width and we were going to struggle with that! Rick O does a bracket to push the chain over slightly for larger rims but if that Dymag is 7" wide your buggered I reckon!!
Kris
Kris
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: my vfr 400 nc30 project
Yeah i remembered reading in your thread about your worry's.ibby4585 wrote:Well we thought my Dymags were 6" width and we were going to struggle with that! Rick O does a bracket to push the chain over slightly for larger rims but if that Dymag is 7" wide your buggered I reckon!!
Kris